How does the Android seetung app delete devices?

In the device example table, press and hold the device ID you want to delete for three seconds and a dialog box will pop up. Click OK to delete the ID.

How to delete devices in IOS seetung app

Just swipe to the left and the box on the right shows delete. Click Delete to confirm to delete the cloud ID.

Seetung client can also set the video camera's bitstream

The phone opens the image of an ID and selects the rightmost setting button, as shown below. The parameter can be changed at the bottom of the open options.

Where can I find the camera's cloud ID?

1. Connect the camera and open UC management software or IE interface. The default user name is login admin password 123456. 2. Log in UC client → select configuration management → remote configuration → network settings → network status → cloud login status → ...

The login status of cloud ID is blank without display?

If the cloud login status box does not appear. The UC client is too old. You can download and install the latest UC client published on the official website.

Why is the cloud ID login status 0?

A: if the login status is 0, it means that the camera cannot access the public network and cloud information. 1. Please check whether the camera network cable is finally connected to the router, and whether the network indicator flashes normally. 2. Check whether the ...

How to set the recording video for UC2 client?

When UC2 client records audio, you need to check the record audio option when configuring recording parameters.

Th38a3 ie is normal. Does UC client have flower screen or mosaic?

Update the UC2 client version, which can be displayed normally (UC2 version No. v4.9.3.2 or later).

How to turn on the audio?

The module shall support the audio function, correctly connect the active pickup, and turn on the audio in the media setting audio coding parameter setting in the module setting interface;

After DHCP is enabled, the device cannot obtain the IP address automatically?

DHCP is short for Dynamic Host Configuration Protocol, which is used to automatically assign IP addresses to LAN devices. After DHCP is enabled, a functioning DHCP server is required. Generally, the router is used to realize the DHCP server function. When the device can...

Using IE to log on to the IPC web page, the page does not come out, how to open

Because our web page is used before IE9, some functions need to be used normally in compatibility view. Open IE9, there is an icon behind the address bar, the mouse will display "compatibility view", click. You can also select compatibility view from the drop-down menu ...

UC2 client can search the device, check the image prompt and how to deal with it

Please check whether the computer network segment is consistent with the IPC network segment, and change the device and computer in the same network segment.

How to retrieve IPC or NVR password?

In the UC2 installation directory IPCSearchUtil.exe After the tool is opened, click search to search and view the password of the device in the LAN.

Forget how to recover the camera or NVR password

Step 1: log in to UC client, use the default user: "admin" password: "123456" to directly log in to our UC client. Step 2: search the camera After logging in the UC client, find the "search device" button under the configuration management - device management interface...

When UC logs in, what happens if UC page buttons are not fully loaded?

Open task management, close the program with the highest CPU consumption or the program with the largest number of closed handles, and reopen the application is normal.