In the device example table, press and hold the device ID you want to delete for three seconds and a dialog box will pop up. Click OK to delete the ID.

Just swipe to the left and the box on the right shows delete. Click Delete to confirm to delete the cloud ID.

The phone opens the image of an ID and selects the rightmost setting button, as shown below. The parameter can be changed at the bottom of the open options.

1. Connect the camera and open UC management software or IE interface. The default user name is login admin password 123456. 2. Log in UC client → select configuration management → remote configuration → network settings → network status → cloud login status → device cloud ID. if the login status is 1, the dev...

If the cloud login status box does not appear. The UC client is too old. You can download and install the latest UC client published on the official website.

A: if the login status is 0, it means that the camera cannot access the public network and cloud information. 1. Please check whether the camera network cable is finally connected to the router, and whether the network indicator flashes normally. 2. Check whether the DNS in the network status is consistent with the W...